HP LaserJet M1005 MFP - Using the control panel to change settings

HP LaserJet M1005 MFP - Using the control panel to change settings

Changing the control-panel display language
Changing the default media size and type
To change the default media size
To change the default media type
You can configure settings at the control panel.

Changing the control-panel display language

Use this procedure to print reports or to show messages on the device control-panel display in a language other than the default for your country/region.
  1. Press Menu/Enter.
  2. Use the < or the > button to select System setup, and then press Menu/Enter.
  3. Use the < or the > button to select Language, and then press Menu/Enter.
  4. Use the < or the > button to select the language that you want.
  5. Press Menu/Enter to save the selection.

Changing the default media size and type

Set the size and type of media that you usually load in the input tray. The device uses these settings for copying and printing.

To change the default media size

  1. Press Menu/Enter.
  2. Use the < or the > button to select System setup, and then press Menu/Enter.
  3. Use the < or the > button to select Paper setup, and then press Menu/Enter.
  4. Use the < or the > button to select Def. paper size, and then press Menu/Enter.
  5. Use the < or the > button to select the size.
  6. Press Menu/Enter to save the selection.

To change the default media type

  1. Press Menu/Enter.
  2. Use the < or the > button to select System setup, and then press Menu/Enter.
  3. Use the < or the > button to select Paper setup, and then press Menu/Enter.
  4. Use the < or the > button to select Def. paper type, and then press Menu/Enter.
  5. Use the < or the > button to select the type.
  6. Press Menu/Enter to save the selection.

https://support.hp.com/

Comments

Post a Comment