HP LaserJet M1005 MFP - Restoring factory default settings

HP LaserJet M1005 MFP - Restoring factory default settings

Restoring the factory-set defaults returns all of the settings to the factory defaults.
CAUTION:
This procedure deletes any pages that are stored in the memory. The procedure then automatically restarts the device.
  1. On the device control panel, press Menu/Enter.
  2. Use the < or the > button to select Service, and then press Menu/Enter.
  3. Use the < or the > button to select Restore defaults, and then press Menu/Enter.
    The device automatically restarts.

https://support.hp.com/

Comments

Post a Comment

Popular posts from this blog

HP LaserJet M1005 MFP - Scan image quality problems and solutions

Image
HP LaserJet M1005 MFP - Scan image quality problems and solutions Solving scanned-image problems Use the table below to help solve problems with the quality of the scanned image. You can also try updating your printer software and firmware to the most recent version by visiting the HP product support page: www.hp.com/support/ljm1005. The following are a few simple steps you can take to improve scan quality. Use high-quality originals. Load the media correctly. If the media is loaded incorrectly, it might skew, which causes unclear images. Adjust the software settings according to how you plan to use the scanned page. Problem ...
Read more

HP LaserJet M1005 - Unable to Print in Black and White from Microsoft PowerPoint 2010

Image
HP LaserJet M1005 - Unable to Print in Black and White from Microsoft PowerPoint 2010 Issue Not able to print in black and white from Microsoft PowerPoint (Microsoft Office 2010 version only). Solution The above issue has been identified by Microsoft and the following MS hotfix is available to resolve it. Click here to access the document "Description of the PowerPoint 2010 hotfix package (powerpoint-x-none.msp)". NOTE: If the above link does NOT work, the MS document can be found by searching the web for " MS ,  KB ,  2466273 "). Disclaimer NOTE: One or more of the links above will take you outside the Hewlett-Packard Web site, HP does not control and is not responsible for information outside of the HP Web site. https://support.hp.com/
Read more

HP LaserJet M1005 Multifunction Printer - Copies are cut off or incomplete when using an A4 size paper

Image
HP LaserJet M1005 Multifunction Printer - Copies are cut off or incomplete when using an A4 size paper Issue When copying an A4 size paper using the HP LaserJet Multifunction Printer (MFP), the output is cut off or incomplete. Figure : Copy output of the A4 size paper is cut off Solution Follow these steps to resolve the issue: Step one: Check if the firmware Datecode is 20141010 or later Step two: Configure the default paper size setting to A4 Step one: Check if the firmware Datecode is 20141010 or later To check if the Firmware Datecode of the HP LaserJet M1005 MFP is 20141010 or later, print a Configuration Page. ...
Read more